Technical resources for developers
The resources in this section are for developers. Mobitex Technology can provide a number of tools, many of them free of charge, to assist software developers and hardware designers. Please note that these tools are intended to be used in a development environment and are not suitable for end users. The white paper below provides information on Mobitex features and interfaces, as well as an overview of the network and special considerations for wireless communications.
Download short introduction for application developers
Software Development Tools
In this section you will find protocol descriptions, and drivers for MDOT/MPAK implementations for fixed server applications.
For a description of the MDOT protocol, please see the open or licensed version of the MIS.
Access MIS download page
The MDOT DLL is a dynamic-link library that implements the MDOT protocol, allowing applications with no knowledge of MDOT to connect to a Mobitex switch and communicate with modems. The MDOT DLL can be used on Windows platforms. Source code for the DLL is available upon request.
Download MDOT DLL
MASC protocol description and drivers
In this section you will find protocol descriptions, drivers and source code for MASC/MPAK implementations for modems.
MASC/MPAK protocol description:
MASC Programmers reference guide
For information about Wavenet’s modem products, please visit their web site at:
This package contains source code and documentation for a MASC driver written in Java. The source code is at your disposal and free to use. The MASC driver features functionality for sending and receiving radio messages as well as support for a set of other MASC commands. In addition to the MASC driver, the installation also includes a sample application that utilizes the MASC driver. In order to compile and execute the sample application, a Java 2 Software Developer's Kit (such as Java 2 SDK Standard Edition, v1.3) must be installed.
Download MASC Driver source code
The MASC DLL is a dynamic-link library that implements the MASC protocol, allowing applications with no knowledge of MASC to communicate with Mobitex modems. The MASC DLL can be used on Windows and Pocket PC 2002.
Download MASC DLL
Modem configuration tools & firmware for Ericsson and Mobitex Technology AB modem types
Downloading software (MobiOne)
In order to run the firmware and configuration files in this section, you need to download the MobiOne software below. In the security level 1 version of the MobiOne software it is possible to enter a MAN-number. To obtain the level 1 version software, please send an e-mail to the Technical Assistance Center (TAC) and describe why you need it. You will then receive the software via e-mail.
Download the MobiOne software, security level 2
Download the MobiOne Userguide
Request security level 1 software (features settings of MAN number):
In order to operate the firmware updates below, you need to download the MobiOne software.
R2A for M3090/M3080
Modem configuration files
In order to operate the firmware updates below, you need to download the MobiOne software. All configuration files are in mtx format.
Velocita Wireless network in the US
Telcel network in Venezuela
Rogers network in Canada
Transcomm network in the UK
RAM network in the Netherlands and Base network in Belgium
Mowic network in Sweden
Telbank network in Poland
Superonline network in Turkey
Nexwaves network in Singapore
Sonera network in Finland
Sky network in China
TDDL network in Hong Kong
UNT network in Brazil
TWW network in Brazil
Real Telecom network in Korea
Interexport network in Chile
Massinfo Nusantara network in Indonesia
RATP network in France
Radio Test Equipment
SA-MTE (Stand Alone Mobile Test Equipment) is a powerful testing environment that manufacturers of Mobitex equipment can use to test their mobile units and applications. It provides a complete set of test tools that can emulate radio-link traffic, as well as single radio-link frames.